Epoxy construction process for basement floor

Supermarkets, office building, shopping centers often have basement parking areas. But this is a place with high humidity and is most affected by vehicles. To reduce these problems, many buildings choose industrial floor paint. So, what are the advantages of industrial floor paint? How does epoxy construction process for basement floor? Let’s find out with APT?

Advantages of epoxy floor basement paint

  • Good wear, increasing the life of concrete floors

A place has a lot of vehicles travelling, concrete floor is subject to strong impacts. When apply an epoxy layer, floor is protected and resistant to such agents. The paint adheres to a concrete structure, minimizing dust and dirt on the floor.

  • Good slip resistance

Slope basement is a place that easily to have accident. But when apply an epoxy layer, the surface will have more friction, slip resistant when the floor is wet.

Thi công sơn epoxy tự san phẳng KERASEAL ADO30 của APT
  • Highly aesthetic

Not only has the ability to resist corrosion and slip very well, epoxy paint also has a lot of attractive colors to choose. The floor is covered with beautiful gloss paint. Harmonious colors create a cool, clean and hygienic space.

Epoxy construction process for basement floor

Epoxy paint for basement has 2 main types is epoxy coating and epoxy self-leveling. But for basement areas that are not subject to high impact, people often use epoxy coating system to save costs. To do this, the constructor needs to know 5 steps:

Step 1: Treatment of floor surface

The treatment of floor surface is the first step. Although it is not difficult to perform, this stage still requires meticulousness from the contractor.

Use an industrial 3-phrase floor grinder to create a rough surface. Then use vacuum clean completely dust before construction.

Step 2: Filling the surface

This act will help the surface of basement floor to achieve absolute flatness. The imperfections on the floor surface will be covered with a specialized mortar. Then the constructor sanded and continued to clean the floor.

Step 3: Apply primer

Primer is an important step to help connect the coating to the concrete floor, as well as to make the concrete floor hard, solid and more durable. Therefore, the constructor needs to cover evenly at the locations on the floor, ensuring the next coat has the best adhesion.

Thi công sơn epoxy tự san phẳng KERASEAL ADO30 của APT

Step 4: Apply the first epoxy coating

With this coating, the constructor can use short hair roller or paint spray gun. But with each type of paint spray gun should be used with different rates suitable for each paints. For example, APT’s ADO121 solvent free epoxy paint should use a single-shot sprayer with a 0.015 inch tungsten nozzle in a 20:1 ratio. It is best to mix 5% solvent before use.

Step 5: Applying epoxy coating to the basement floor of the second coat

Before applying the second layer of paint, the construction needs to test a thorough inspection of the entire surface, and troubleshoot problems on the floor.

Usually the minimum time to apply the next coat is 12 hours. Maximum time of subsequent coat is 48 hours. Therefore, at least after 1 day of application, the new builder can apply the next coat of paint. After 24 hours, the surface is finished and light movement is possible.

Investors should use coating to paint the basement?

KERASEAL ADO121 is a two component solvent and phenol coating system. The product provides protection of floor surface with light to moderate loads. This meets the requirements of the basement floor, where many vehicles travel with low payload.

The product has received a lot of positive feedback from investors and large contractors. We believe that you will also be satisfied with the quality of our products. For advice and immediate order, investors, contractors contact

Leave a Reply

Your email address will not be published. Required fields are marked *

0904 339 299