5 types of epoxy paints of APT Vietnam and their application in specific areas

APT Vietnam’s epoxy paint is known as a solution to protect concrete floor are chosen by many investors and factories. But in fact, not everyone can understand specific characteristics of each paint as well as their uses in each area in factory. Let find out with APT in this article below!

Self-leveling epoxy paint KERASEAL ADO40

KERASEAL ADO40 is self-leveling, solvent-free and phenol coating system. With abrasion up to 0.65 mg/cm2, impact resistant achieves 68 kg/cm, KERASEAL ADO40 has better wear and abrasion resistance than normally coating paints. So they are often used in areas of factories with assemble lines repair workshops, areas that often use large load trolleys.

Besides, with 100% solid with self-leveling ability, KERASEAL ADO40 brings hard, smooth and glossy coating which is easy to clean. This is a strength that helps KERASEAL ADO40 to score in floor areas which have high antibacterial, strict requirement about GMP standard such as clean rooms in hospital, laboratories, clean room in pharmaceutical production, food and beverage production.

Antistatic epoxy paint KERACOTE ESP300

KERACOTE ESP300 is self-leveling epoxy system, antistatic with standard floor surface Conductive 10^4 – 10^6 Ω or Dissipative 10^6 – 10^9 Ω for concrete bearing load from heavy to medium.

Paint can be used to meet the EOS/ESD standards, as well as requirements of explosive and flammable material ignition control.

In addition, the paint has ability of controlling the electrical resistance on the surface within the range of electrostatic destruction and conductivity, suitable with the value determined in the EOS / ESD test method of the ESD STM S7.1- 2005.

With very good antistatic ability, KERACOTE ESP300 is often used in electronic component manufacturers. This is place where there is a large amount of magnetic field, so KERACOTE ESP300 helps to neutralize the charge, as well as ensure the safety for workers, equipment and machinery in factories.

Chemical resistant epoxy paint KERAGUARD VL100

KERAGUARD VL100 is 2-component novolac epoxy system with 100% solid content.

With good flow ability and high efficiency with both steel and concrete, KERAGUARD VL100 is often used to protect steel, concrete surface in water storage tanks or general chemical storage tanks with low concentration.


Especially, KERAGUARD VL100 completely overcomes the brittle and fragile weaknesses of other chemical resistant paints. With wear resistant ability up to 72 kg.cm, smooth coating and variety of color options, KERAGUARD VL100 is often used to protect floor surface in chemical factories, chemical storage areas,….

Chemical resistant epoxy paint KERAGUARD ADG220

KERAGUARD ADG220 is 2-component chemical resistant epoxy coating paint system. Paint can be used as a coating over an epoxy mortar as a surface repair epoxy.

With abrasion up to 0.51 mg/cm2, impact resistance achieves 50kg. cm, KERAGUARD ADG220 is often used for corrosion resistance for clean water storage tanks, metal roof, resistant to textile chemicals, cleaning chemicals and industrial chemicals.

Water-based epoxy paint KERASEAL WB10

KERASEAL WB10 is water-based epoxy floor coating with low VOC content. Paint has ability to create breathable membrane for concrete surface and can be used for all types of concrete floors even when humidity of floor up to 18%.

With these advantages, KERASEAL WB10 becomes the perfect choice for less airy areas such as basements, stairs, rooftops, walkways… Used for wall of laboratories, clean rooms in pharmaceutical factories.

In addition, with low VOC content, paint has less odor than solvent-based products, friendly with environment. This thing is perfect advantage that helps KERASEAL WB10 can score point in projects with foreign investors. Paint dries quickly, the surface is anti-slip and has excellent adhesion to damp, spongy concrete surface.

Thus, there are many types of epoxy paint. Each product has different uses, depends on requirements of each project. So investors, contractors should consider more about product characteristics in the selection process.

To be consulted and received free samples of these products from APT, the investor, the factory immediately call 0904 339 299