Application process of self-leveling epoxy paint

Epoxy paint is a solution to protect factory concrete floors that are chosen by many investors. But not all concrete floors use coating epoxy paints. In some cases, when the factory often uses large trucks moving on the floor, they must choose a self-leveling epoxy coating system. So what is self-leveling epoxy paint? How are their advantages? And how does application process? Let's find out with APT in the article below!

What is self-leveling epoxy paint?

Self-leveling epoxy paint is a two-component industrial floor coating product used for concrete surfaces. With their self-leveling ability, they will give the factory a shiny coating. The floor is flat, seamless, and hygienic.

Advantages of self-leveling epoxy paint

Good durability: This is one of the most outstanding advantages of this coating system because they can withstand a stronger impact than other paints.

Chemical resistance, ensuring factory floor hygiene: If the grease is dropped on the floor and the factory, which makes floors degrade, the self-leveling epoxy coating provides a clean, hygienic environment, limit the ability to stick dust, prevent the formation of bacteria and harmful agents.

High aesthetics: No cracks, seamless and shiny surface.

Good waterproof ability: Like other paint lines, self-leveling epoxy paints have 2 types of solvent-based paints and water-based paints. If the factory floor has high humidity, water-based self-leveling epoxy paint will be the ideal choice with 18% humidity resistance.

Extremely good coverage: Completely covers surface imperfections due to the self-leveling mechanism of the paint.

Application process of self-leveling epoxy paint

Although there are 2 types of water-based paints and solvent-based paints, basically the self-leveling epoxy coating process still has to go through the following 5 steps:

Step 1: Scratch the floor helps the concrete floor create roughness and grip.

Step 2: Vacuum the constructed floor.

Step 3: Apply the primer.

Step 4: Apply the basecoat. Use short hair roller and spiked roller to break air bubbles on the surface of concrete surface.

Step 5: Scratch the surface and clean it.

Step 6: Apply the topcoat.

Note: Minimum time for the next coat is 12 hours.

Thus, self-leveling epoxy coating is an optimal solution for factories and workshops that often have to move with large trucks, materials and goods. On the market today, there are many units that are self-leveling epoxy paint distributors. But to buy quality self-leveling floor paint from the manufacturer itself, the investor can immediately contact APT Vietnam at 0904 339 299. We are very pleased to answer all questions of investor, contractor in the shortest time!

Factory: Zone 2, Phu Minh Commune, Soc Son, Hanoi.

Hanoi Office: Room 1106 – C2, D’ Capital Tran Duy Hung, Hanoi

HCM Office: 647/18A, Highway 13, Hiep Binh Phuoc Ward, HCM

Hotline: 0904 339 299