– During application, workers must wear full labor protection (hat, clothes, shoes, glasses, mask, and gloves).

– Substrate moisture content < 6%.
– Maximum relative air humidity 85%.
– Min. substrate temperature 13ºC.
– Max. substrate temperature 39ºC.
– Construction areas require good ventilation.

– Material includes composition A and composition B.
– Using specialized mixer, approx. 600 rpm with a suitable mixing paddle.
– Add the composition B to the composition A and mix a further 3 minutes until homogenous (may take a longer depending on weather conditions and equipment).

– Material includes 2 components: Composition A and Composition B.
– Using machine with specialized mixing paddle to mix the composition A within 3 minutes (may take a longer depending on weather conditions and equipment).
– Add the composition B to the composition A mix a further 3 minutes until homogenous.

– The surface ensures no dust, dirt, oil.
– Surface is grinded by large capacity machine with suitable sharpening blade or Short Blasting.

– Using long-hair roller to spread KERASEAL PS60 on the cleaned surface.
– Applying by roller frequently ensuring uniform coverage of the material to be applied to the surface.
– Do not apply primer too thick or to create puddles will cause cracking and blistering.
– Allow to dry 8 hours before patching, surface treatment or apply the next steps.
– The cracks on the surface must be filled with KERACRETE NS50. 

– Cleaning and remove dirt, impurities on the primer surface KERASEAL PS60 before applying KERASEAL PSC.
– Spread the mixture on the surface by short-hair roller. Apply by roller several times to ensure the material is homogeneous.
– Allow to dry at least 8 hours before apply the next steps. 

– Depending on the required reactance to choose the suitable materials.
– After KERASEAL PSC completely dries, remove impurities, excess materials on the surface by mechanical preparation.
– Spread KERACOTE EC100 on the area to be applied with a specialized brush, finish the surface with serrated brush and spiked roller.
– Apply by spiked roller several times on the surface while the topcoat still wet to remove foam.
– The topcoat must ensure the coverage, the uniformity in gloss and color.
Allow to dry at least 24 hours before light traffic and 72 hours before using.