– During application, workers must wear full labor protection (hat, clothes, shoes, glasses, mask, and gloves).

– Substrate moisture content < 6%.
– Maximum relative air humidity 85%.
– Min. substrate temperature 13ºC.
– Max. substrate temperature 39ºC.
– Construction areas require good ventilation.

– Using specialized mixer, approx. 600 rpm with a suitable mixing paddle.
– Add the composition B to the composition A and mix a further 3 minutes until homogenous (may take a longer depending on weather conditions and equipment).

– Material after mixing is homogeneous, no clot and deposit.

– Surface is clean without impurities.
– Remove weak adhesion on the surface.
– Surface is grinded by specialized machine with suitable sharpening blade or Short Blasting.
– The cracks and pitting positions are handled with specialized sealant.

– Before applying the primer, construction area surface must be carefully moistened. Avoid stagnate water and create puddles on the surface.
– Spread KERACRETE MB100 on the area to be applied with a specialized brush, finish the surface with serrated brush.
– Apply by spiked roller several times on the surface while the topcoat still wet to remove foam.
– Finishing mortar layer must ensure coverage, uniformity of the surface.
Notes: In order to ensure the advantage of product, waterproofing coating after construction need a protect layer to avoid UV and external forces on the coating surface.