စက်ရုံသည်ကွန်ကရစ်ကြမ်းပြင်များကာကွယ်ရန် KERASEAL ADO20 ကိုရွေးချယ်ရခြင်းအကြောင်းအရင်း ၄ ချက်
Standing in front of many new paint companies on the market, APT’s KERASEAL ADO20 products have always been popular for many years and received a lot of positive feedback from customers. So what are reasons that make KERASEAL ADO20 has so many choices? What should be noticed in the construction process of this product? Let find out with APT in the article below!
What is KERASEAL ADO20 paint?
KERASEAL ADO20 is a 2-component solvent-based epoxy floor coating system, finished surface has no circuit and general chemical resistance.
4 Reasons KERASEAL ADO20 is selected
• Good abrasion resistance: With abrasion resistance up to 0.65 mg / cm2, KERASEAL ADO20 is often used for food, beverage, mechanical factories, hospitals, electronic components assembly factories ... places that are easy to the abrasion of the falling chemicals, the gravity of the materials and the trolleys.
• Beautiful glossy surface: KERASEAL ADO20 has 80% solid content, 20% solvent content. So with the effect of solvents in the paint compositions, they give the concrete a shiny concrete with many beautiful colors.
• Easy to clean and highly hygienic: The smooth, glossy floor will against dirt, grease, preventing bacterial penetrates.
• High economic efficiency: With the two-component solvent-based floor coating system, KERASEAL ADO20 is highly durable. The average lifespan of paint is from 3 - 4 years. In addition, the construction steps do not require high technical level as other paints. This helps factory to save a considerable amount for repair costs after construction.
Application process and notes of KERASEAL ADO20
KERASEAL ADO20 has simple construction process. Includes the following 6 steps:
Step 1: Surface preparation
• Conditions of concrete floor to use KERASEAL ADO20 solvent-based epoxy paint is smooth surface, humidity
• Then, use a rubbing machine to smooth the concrete floor and use a vacuum cleaner to remove residual dirt on the floor.
Step 2: Apply the primer
Primer product used before applying KERASEAL ADO20 is KERASEAL PS60. This is a solvent-based epoxy primer. They will increase the adhesion between the concrete and the next coatings. Therefore, the constructor must perform this step before applying the topcoat.
The primer is rolled as thin as possible. Consumption is from 0.1 - 0.2 kg / 1m2. After at least 1 day, the primer dries; the constructor can light traffic and patch the surface.
Step 3: Patching surface
The surface patching product used is KERACRETE NS50. This is a non-sagging 2 component epoxy system. It is an ideal product to be used in a variety of mortars, patching, repairing pitting areas. Surface drying time is 3 hours 30 minutes. The average consumption is 1.5kg / m2 applied with a thickness of 1 mm2.
Step 4: Applying the basecoat
Because this is coating paint line, the constructor needs to use a short hair roller. Consumption for a coat with a standard surface is 75µm: 0.10kg / m2
Step 5: Patching and sanding surface
Patching second time is a necessary step, in order to remove remaining pitting on the surface after the primer is applied. Then, the constructor needs to use the sanding machine to create the adhesive for the final coating.
Step 6: Apply the topcoat
Minimum time to apply next coat is 12 hours. So after the basecoat is applied, the concrete floor needs at least 1 day to dry and apply the topcoat. After 72 hours of construction, the concrete floor can be put into use.
With more than 10 years of experience in manufacturing and distributing industrial floor paints, APT Vietnam believes that customers will be completely assured of the quality of construction projects when using KERASEAL ADO20. For advice and orders, investors and contractors immediately contact phone number 0904 339 299!